Coffee machine/kettle NTC temperature sensor:
Product introduction: This NTC temperature sensor is suitable for coffee machines, IH cookers, electric kettles, etc. Using the MF58 NTC thermistor chip, this temperature sensor is a glass-sealed thermistor, so it is heat-resistant and has higher stability, epoxy...

Material: aluminum shell/Teflon
Operating temperature range: -40~200℃

Product advantages:
1. It adopts high temperature resistance and high stability components, with fast response and stable use;
2. Aluminum shell, in line with national environmental protection standards;
3. Designed with a waterproof rubber ring groove, small diameter, easy to use, and accurate temperature measurement;
4. Epoxy resin encapsulation, good waterproofness and easy to use;
5. Samples can also be arranged if there is no ready stock.
Product parameters

NTC (diode, single-ended, small black head, etc.), KTY, PT100/1000, thermocouple….
NTC/PT100/1000 platinum resistor (can be customized)

Product advantages:
1. It adopts high temperature resistance and high stability components, with fast response and stable use;
2. Aluminum shell, in line with national environmental protection standards;
3. Designed with a waterproof rubber ring groove, small diameter, easy to use, and accurate temperature measurement;
4. Epoxy resin encapsulation, good waterproofness and easy to use;
5. Samples can also be arranged if there is no ready stock.
Product parameters

NTC (diode, single-ended, small black head, etc.), KTY, PT100/1000, thermocouple….
NTC/PT100/1000 platinum resistor (can be customized)


A temperature sensing wire, also known as a temperature sensor wire, is an electronic wiring harness device used to measure temperature changes. When shopping for a temperature sensing wire, there are several important considerations to make to ensure you choose the right temperature sensing wire to meet your needs.

1. You need to determine the temperature range of the use environment

Different types of temperature sensing wires are suitable for different temperature ranges. Some temperature-sensing wires are adapted to low-temperature environments, some are adapted to normal-temperature environments, and others are adapted to high-temperature environments. Make sure the temperature sensing cable you choose can work within the temperature range you need to measure.

2. You need to consider the accuracy of the temperature sensing line
Accuracy refers to the difference between the temperature measured by the temperature sensor wire and the actual temperature. For some precise applications, such as laboratory experiments or industrial control, you may need to choose a higher accuracy temperature sensing line. Therefore, check the accuracy specifications of the temperature sensing wire when purchasing and choose the accuracy level that suits your needs.

3. Consider the response time of the temperature sensing line
Response time refers to the time between the temperature sensing line detecting a temperature change and outputting the measurement result. For some applications, response time may be critical, especially in environments where rapid monitoring of temperature changes is required. Therefore, when purchasing a temperature sensing line, pay attention to its response time and choose a suitable temperature sensing line.

4. You also need to consider the protection level of the temperature sensing line
The protection level is a measure of the impact of the temperature sensing line on the external environment. If your application environment contains pollution, humidity, or other factors that may cause damage to the temperature sensing wire, you may need to choose a temperature sensing wire with a higher protection level. For example, some temperature-sensing wires are waterproof and stain-resistant, making them suitable for use in harsh conditions.

5. You also need to consider the installation and connection methods of the temperature sensing wire.
Temperature sensing wires can come in different lengths, shapes, and connector types to suit different installation needs. When shopping, make sure you choose a temperature-sensing cable that can be easily installed and connected to your system or device.

6. Consider price and supplier’s reputation
The price of temperature sensing wires may vary depending on brand, accuracy, features, etc. When purchasing, you should choose a reasonably priced temperature sensor line based on your needs and budget. Additionally, choosing a reputable supplier ensures that you are purchasing high-quality and reliable temperature sensing wire.

When purchasing temperature sensing wires, you need to consider factors such as temperature range, accuracy, response time, protection level, installation and connection methods, price, and supplier reputation. Carefully evaluating these considerations can help you choose the temperature sensing wire that suits your needs and ensure the accuracy and reliability of your temperature measurement work. YAXUN, a temperature-sensing wire harness manufacturer with self-developed NTC chips, wishes you good luck in purchasing temperature-sensing wires and obtains satisfactory results.